Flame retardant of Hard Polyurethane is of High insulation, and high thermo engineering property. At 35-40kg/m3, Its thermal conductivity is only 0.018-0.023 w/(m.k), about half of that of EPS, and is the lowest among all insulation materials.
Hard Polyurethane is moisture proof and waterproof. It is hydrophobic and foam open cell rate is over 90%. Its thermal conductivity is unchanged even after it absorbs water, and there will no seepage to the surface.
Hard Polyurethane is fireproof, flame-retarded, and high temperature resistant. After added with flame retardant, it will be difficult to burn and self-extinguishing. It will only be softened when temperature is above 250, and only resolve at higher temperature. In addition, when burning, it will form dust on its surface, which well insulate the bubble underneath, and then stop fire from further spreading. One more important point, even under high temperature, it will not generate noxious gas.
With outstanding insulation performance, it will help to reduce thickness of outer structure and increase usable area inside, when the requirement for insulation is the same.
Hard to distort, and then the surface is stable and safe.
Hard Polyurethane is of blind hold structure, then it is not only strong on thermal insulation, and also very good on anti-freezing, and sound absorption. Under normal usage and maintenance, it can last for over 30 years. It can sustain in the environment of dry, moist or electrochemical corrosion, and not affected by insects, fungus, algae or rodent.
High performance price ratio. Even though its unit price is higher than other traditional insulation materials, the higher cost is offset by the saving of air conditioning or heat supply.
Application
The Flame-retardant Polyurethane insulation board we produces is widely used on color-coated steel insulation sandwich board, central air-conditioning, building wall material, cold storage building, refrigerating chamber, Incubator and chemical storages.
Feature of the product
Wide range of offering: 40-60kg/m3, 0.5-4Meter(length), 0.5-1.2Meter(width), 20-200mm(thickness)
Accuracy. Thickness tolerance is 士0.5mm, which secure flatness of surface
Bubble is tiny and intensive. Hole of bubble is uniform
Light. It reduces the weight of finished products by 30-60%, compared with traditional products
Sustain high pressure during processing/manufacturing of finished products
Convenient for quality inspection. When cutting, the surface of 4 corners are removed, and so the quality of the board is visible. The thickness can follow the end users’ requirement.
Specification
Flame retardant of Hard Polyurethane bubble board
Product |
Polyurethane bubble board |
Density |
40-60kg/m |
Specification |
Length:4000-500mm |
Width:1200-500mm |
|
Thickness:tailor to customer requirement |
|
Special requirement can cut follow bubbles |
|
Key factors
Density (kg/m |
40- 60 |
Anti-pressure (kg/cm2) |
2.0 - 2.7 |
Close area % |
> 93 |
Water absorption % |
≤3 |
Heat conductivity W/m.k |
≤0.025 |
Size stability % |
≤ 1.5 |
Temperature of usasge℃ |
-196℃ +120℃ |
Oxygen index % |
≥28 |
Normally used on insulation board of building wall. The board is strong on thermal insulation, sound insulation and flame retardant, and compliant to fire protection regulation. By adding this hard Polyurethane bubble board, the material will be with high strength and stiffness. The lower layer board is smooth and flat, clear lineup, adding flatness and beauty to interior. The installation is convenient and then shorten the time of construction. It is really a new construction material to use.
|
|
Building wall material
|
Color-coated steel insulation sandwich board
|
|